background image

17 

Important Information

 

 

Please  read  these  instructions  carefully 
before assembly and use of your barbecue. 
 

n

Retain  these  instructions  for  future 
reference.

 

n

This product is for outdoor use only. Do not 
use indoors. 

 

n

Do not use the barbecue or store gas bottles 
below ground level. LP gas is heavier than 
air so if a leak occurs the gas will collect at a 
low level and could ignite in the presence of 
a flame or spark.

 

n

For  use  with  LPG  bottled  gas  only.  A 
suitable regulator must be used for butane, 
propane or mixes.

 

n

Remove plastic wrap from any part before 
lighting.

 

n

Do not use within 1m  of  any flammable 
structure or surface. Do not use under any 
combustible surface.

 

n

LP  gas  bottles  should  never  be  placed 
directly underneath the barbecue.

 

n

LP gas bottles should never be stored or 
used laid on their side, in the horizontal 
position. A leak would be very serious and 
liquid could enter the gas line with serious 
result.

 

n

Never store gas bottles indoors.

 

n

Open the barbecue hood before lighting.

 

n

Once lit, do not move the barbecue until it 
has completely cooled, after use. 

 

n

This barbecue must not be left unattended 
when lit.

 

n

The hood or lid handle can become very hot. 
Grip only the centre of the handle. Always 
use oven gloves when cooking or carrying 
out any adjustments to the barbecue.

 

n

Use purpose designed barbecue tools with 
long, heat resistant handles.

 

n

Use Caution when opening hood or lid, as 
hot steam inside is released upon opening.

 

n

Parts of this barbecue become very hot – 
care  must  be  taken,  especially  when 
children, elderly people, and animals are 
present.

 

n

Turn off the gas supply at the gas bottle 
after use.

 

n

Never  cover  a  barbecue  until  it  has 
completely cooled.

 

n

Use this barbecue only on a stable, flat 
surface.

 

n

Before you use your barbecue, perform a 

leak test. This is the only safe and sure way 
to detect any gas leaking from joints and 
connections of the barbecue after assembly.

 

n

Leak test annually, and whenever the gas 
bottle is removed or replaced.

 

n

Do not store flammable materials near this 
barbecue.

 

n

Do not use aerosols near this barbecue.

 

n

Failure to follow the manual’s instructions 
could result in serious injury or damage.

 

n

Parts sealed  by the  manufacturer  or  his 
agent must not be altered by the user.

 

n

Modification  of  the  barbecue  may  be 
dangerous, is not permitted and will nullify 
any warranty. 

n

If  you have any queries regarding these 
instructions, contact your local dealer. 

 

Gas, Regulator and Hose 

 

This barbecue includes a regulator which is 
suitable for use with Propane Patio Gas bottles. 
For optimal performance, we suggest to use a 
13kg size gas bottle. Propane bottles will supply 
gas all year round, even on cold winter days. A 
spanner may be required to change gas bottles. 
 

• 

The hose should hang freely with no bends, 
twisting, tension, folds, or kinks that could 
obstruct free flow of gas. Always inspect 
the hose for cuts, cracks, or excessive wear 
before use. 

• 

Apart from the connection point, no part of 
the hose should touch any hot barbecue 
parts.  If  the  hose  shows  any  sign  of 
damage it must be replaced with a hose 
suitable for use with LP gas which meets 
the national standards for the country of 
use.   

• 

A  suitable  hose  must  comply  with 
EN16436-1  or  local  regulation,  and  the 
length should not exceed 1.5 metres. 

 
The  regulator  included  with  this  barbecue 
complies with EN16129.  YOU  MUST  HAVE 
THE  PROPER  REGULATOR  AND  GAS 
BOTTLE IN ORDER FOR THE BARBECUE TO 
OPERATE SAFELY AND EFFICIENTLY. USE 
OF  AN  INCORRECT  OR  FAULTY 
REGULATOR  OR  GAS  BOTTLE  IS 
DANGEROUS AND WILL INVALIDATE ANY 
WARRANTY.  In the  case  of  replacing  your 
original hose and regulator, please consult your 
local gas dealer for the most suitable regulators 
and gas bottles. 

Содержание MF4493

























Отзывы: