5
Assembly
IMPORTANT!
•
TOOLS NEEDED FOR ASSEMBLY:
Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
•
Remove any internal component or packaging from the barbecue body.
•
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
•
Please read the Important Information section carefully before assembly and use of your
barbecue.
1
2
Attach the Legs (C4,C5) to the Panels (C6,C7) using ST4.0x10 Screws (D1x8pcs) as shown.
Attach the front panel assembly and the Legs (C4,C5) to the Wire Base (C8) by inserting the
M6x65 Bolts (D6x4pcs) through the legs, wire base, Ø6 Washers (D7x4pcs) and secure with M6
Nuts (D8x4pcs). Ensure that the holes in the top of each leg which to fix barbecue body are in the
front of the side.
Rear view
Front view
C5
C4
C6
C7
D1
C8
D8
D7
D6
C4
C5
