Attach the Upper Body Support (C1) to the Left and Right Side Trolley Assembly (C2 & C3) using 4
x M6x12 Bolts and Ø6 Spring Washers (A).
Attach a Rear Panel (C6) to the lower section of the Left and Right Side Trolley Assembly and
Bottom Panel using 5 x M6x12 Bolts and Ø6 Spring Washers (A).
Attach the second Rear Panel (C6) to the upper section of the Left and Right Side Trolley
Assembly using 4 x M6x12 Bolts and Ø6 Spring Washers (A).
Fit the doors (C4 & C5) to the cabinet by placing them into the door axes and then depressing the
spring pins to insert into the upper body support.
Attach the Left Drip Tray Bracket (A10) to the Left Side Trolley Assembly (C2) using 2 x M6x12 Bolts
and Ø6 Spring Washers (A) as shown. Repeat for the Right Drip Tray Bracket (A11).
3
4
A
13PCS
26
27
A
C6
C1
16
17
A
A
4PCS
20
24
A10
A11
C4
C5
