OutBack Power FX Mobile Series, Руководство оператора

Страница: 12 / 64

Operation
12
900-0198-01-00 Rev A
Status Indicators
Figure 4 Inverter Status LED Indicators
Inverter Functionality
FX inverters possess a set of common functions or operations. These operations are described in detail
beginning on page 13.
Most of the inverter’s individual operations and functions can be programmed using the system display.
This allows customization or fine tuning of the inverter’s performance.
1 2 3
STATUS INVERTER (Green):
Solid : The FX inverter is on and providing power.
Flashing : The inverter has been turned on but is idle.

The inverter is likely in Search mode. See page 14.
Off : The inverter is off. It is not waiting to provide power.

See the system display manual to turn the inverter on.

Any power present is from another source such as the utility grid
or generator.

The inverter may also be a slave that is in Silent mode due to the
Power Save function. If so, the master inverter may still be
providing power to the system.
See page 28 for a description of Power Save.
AC IN (Yellow):
Solid: The AC source is connected and providing power.

The FX inverter may or may not be charging the batteries, depending on settings.

May be accompanied by green
STATUS INVERTER
indicator (
1
).
Flashing : The AC source is present but has not been accepted.

If flashing continues, the FX inverter is refusing the source. See the Troubleshooting section on page 37.
Off : No AC source is detected.

If a source is supposed to be present, see the Troubleshooting section on page 37.
ERROR (Red):
Solid : Error. The inverter has shut down due to a critical problem which may be internal or external.

This indicator is accompanied by an error message in the system display.

See page 40 for a description of error messages.
Flashing : Warning. The inverter has detected a non-critical problem but has not yet shut down.

A warning does not always lead to a shutdown — if it does, it becomes an error.

This indicator is accompanied by a warning message in the system display.

See page 41 for a description of warning messages.
Off : No problems are detected.