Oursson EK1710P, Инструкция по эксплуатации

Страница: 13 / 16

otHERs
13
Using the product when after the terms of use
(lifetime):
1. Lifetime set by oURsson AG for this product
applies only when the product is used
exclusively for personal, family or household
needs, as well as the consumer observes the
correct operation, storage and transportation
of products. Under the condition of careful
handling of the product and compliance with
the rules of operation the actual life may
exceed the lifetime set by oURsson AG.
2. At the end of the product lifetime, you should
contact an authorized service center for to
conduct a preventive maintenance of the
product and determine the suitability for
further use. Work on conducting a preventive
maintenance of the products is also made in
service centers on paid basis.
3. oURsson AG does not recommend the
use of this product after the end of its lifetime
without its preventive maintenance by the
authorized service center, since in this case,
the product can be dangerous to the life, health
or property of the consumer.
Product Recycling and Disposal
After the expiration of the lifetime, the product cannot
be disposed with another household waste. Instead,
it shall be deposited in the appropriate recycling
collection point for electrical and electronic equipment
for proper treatment and disposal in accordance
with federal or local law. By disposing correctly this
product, you will help to conserve natural resources
and preventing the product from damaging the
environment and human health. For more information
on the collection point and recycling of this product,
please contact your local municipal authorities or the
enterprise for household waste disposal.
Date of manufacture
Each product has a unique serial number in the
form of alphanumeric row and is duplicated with
a barcode that contains the following information:
name of the product group, date of manufacture,
serial number of the product.
serial number is located on the rear of the
product, on the package and the warranty card.
1 the first two letters- correspondence to the
product group (electric kettle – EK).
2 the first two digits – year of manufacture.
3 the second two digits – week of manufacture.
4 the last two digits – serial number of product.
NNote! to avoid misunderstandings, we highly recommend you to read carefully the instruction
manual and the warranty obligations. Check the correctness of the warranty card. Warranty card is
valid only if the following are correctly and clearly stated: model, serial number, date of purchase,
clear stamps, buyer’s signature. the serial number and the model of the device must be the same
as in the warranty card. If these conditions are not fulfilled or the data specified in the warranty
card was changed, the warranty card is invalid.