Oursson EK1530W, Инструкция по эксплуатации

Страница: 5 / 23

9 8
ProDucT seT
The kettle ................................................................. 1 рс.
Anti-scale filter ......................................................... 1 рс.
A stand with cord and cord storage, pic. C-1 ........... 1 рс.
Instruction manual ................................................... 1 рс.
The operation of this device in any case does
not imply application of any force to it, as this
may damage the product due to user fault.
Do not open the lid while water is boiling.
ru
keTTLe’s sTrucTure, Рiс. В
Filter
Water level scale
ON/OFF button
Lid open handle
Handle
Heating element
Stand
uTiLiZATion
en
• This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience
and knowledge. They can only use the device
under the supervision of the person responsible
for their safety, or after instruction on the safe
use of the device. Do not allow children to play
with the product.
• This product is intended only for use in the home.
• If the power cord is damaged, it must be replaced
by a specialist from the authorized service center
( ASC ) OURSSON AG to avoid danger.
• Use only the tools, which are included in the
product set.
• When cleaning the appliance do not use abra-
sives and organic cleaners (alcohol, gasoline,
etc.). When cleaning the device it is allowed to
use a small amount of neutral detergent.
When using electrical appliances should take the
following precautions:
• Use the device according to the following instruc-
tions manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the
product set.
• To protect against risk of electrical shock do
not put the cord in water or other liquid. If
for some reason the water got into the unit,
contact an authorized service center (ASC)
OURSSON AG.
• For power supply, use a power grid with proper
characteristics.
• Do not use the device in areas where the air can
contain vapors of flammable substances.
• Never attempt to open the device by yourself
– it could possibly be the reason of an elec-
trical shock can lead to product malfunction
and will invalidate the manufacturer’s war-
ranty. For repair and maintenance, contact
only authorized service centers meant for
repair of products under the trademark
OURSSON.
• When moved from a cool to a warm place and
vice versa unpack it before use and wait 1-2
hours without turning it on.
• In order to prevent electrical shock do not
immerse the entire product or the wires into
the water.
• Be particularly careful and cautious when using
the device near children.
• Do not touch any hot parts, as this may cause
injury.
• The power cord is specially made relatively short
in order to avoid the risk of injury.
• Do not allow the cord to hang over the sharp
edge of the table or touch hot surfaces.
• Do not connect this device to a grid which is
overloaded with other appliances: it can lead to
the fact that the device will not function properly.
• Do not install the device near gas and electric
stoves and ovens.
• After use, make sure to disconnect the device
from the power grid.
• Keep the device from bumps, falls, vibration and
other mechanical influences.
• Make sure to disconnect the device from the
power grid before cleaning or changing acces-
sories.
• Do not use the device outdoors.
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the
instructions.
SAFETY INSTRUCTIONS, Pic. A
RECOMMENDATIONS
• Please read the instruction manual before using the
device. Keep the manual after reading for further use.
• All illustrations in this manual are schematic
representations of real objects, which may differ from
the actual images.
• Do not fill the kettle above the mark MAX, as the boiling
water can splash.
To accelerate the cooling of the heating
element, do not fill kettle with cold water. This
may damage the heating element.
Hard water can leave scale in the kettle. Use special
cleaners for descaling. Follow the instructions of the used
detergent. Do not use abrasive or harsh cleaners.
• Fill the kettle halfway with water.
• For every 2 cups of water, add 6 tablespoons of white
vinegar 8%.
• Bring to a boil.
• Repeat the procedure if necessary.
• Unplug it.
• Allow the kettle to cool and rinse it twice with cold water.
• Wipe the outside of the kettle with a clean, soft,
damp cloth. In order to prevent electrical shock do
not immerse the entire product or the wires into
the water.
• Thoroughly dry all the parts of the device.
Before firsT use:
• Wash the inner surface of your new kettle with the use
of non-abrasive cleaners. Dry the kettle. Wipe the kettle
with a clean dry cloth.
• Boil the maximum amount of water in a safe manner as
described in the previous section. Monitor for no leaks,
sparks, melting of body, stand, excessive heating of
the power cord, plug, and burning smell during first two
boiling.
• Boiled water from the first two boiling is not recom-
mended to use in food. You can use it for everyday
needs.
oPerATion orDer:
Boiling the water:
1. Remove the kettle from the base, open the lid (Pic. C-2),
and fill it with water.
The kettle is equipped with protection from
switch-on without water. If you turn on the kettle
with no water or less then MIN mark, the device
will turn off after a few seconds. After cooling
the heating element, the kettle will get back to
working condition. Clicking sounds made by the
kettle, indicate the reset of thermostat.
Kettle is designed only for heating clean drinking water.
cLeAning AnD mAinTenAnce, Рiс. D
While utilizing the kettle, the heating element
can change the color, but that will not affect
the kettle’s work.
2. Close the lid and put the kettle on the base. Plug it in.
3. Push button down. Water will heat up.
After boiling the water, the kettle will automatically turn off.
Turning off the kettle
There are two ways of turning off the kettle:
• Push button up, when the device is working;
• When the kettle is working, remove it from the stand.
For information on product certification, see http://www.oursson.com or ask seller for a copy.
ProDucT cerTificATion
*
Products should be stored in dry, ventilated warehouses at temperatures below
- 25°С.
Reparation must be performed only by a qualified personnel authorized by OURSSON AG service
center.
specifications
Model EK1530W
Power consumption, W max 2200
Rated voltage 220-240V~; 50-60 Hz
Level of protection I
Storage and transportation temperature from -25°C to +35°C
Operating temperature from +5°C to +35°C
Humidity requirements 15-75%
Dimensions, mm 217x235x161
Weight, kg 0,89
Capacity, L 1,5
Company OURSSON AG expresses great appreciation to
you for choosing our products. We have done everything
possible so that this meets your needs, and the quality
corresponds to the best world standards. If your OURSSON
branded product will need maintenance, please contact one
of the authorized service center (hereinafter - ASC). A com-
plete list of ASC and their exact addresses can be found on
the website www.oursson.com.
Warranty obligations OURSSON AG:
1. Warranty obligations OURSSON AG, provided ASC
OURSSON AG, apply only to models designed
OURSSON AG for the production or supply and sale wi-
thin the country where the warranty service is provided,
purchased in this country, certified for compliance with
the standards of this country, and also marked the with
official marks of conformity.
2. Warranty obligations OURSSON AG operate within the
SERVICING