background image

20

Saving energy, creating comfort

20170925

OUFLEX

Compact freely programmable automation unit

Dimensions  

width 105 mm, height 112 mm, depth 70 mm 

DIN rail-mounted module casing, 6 modules.

Weight 

0.28 kg

Protection class 

IP 20

Operating temperature 

0 ºC…+50 ºC

Storing temperature   

-20 ºC…+70 ºC

Power supply

Operating voltage

22 VAC - 33 VAC (50-60 Hz,) or 20 – 48VDC

Power requirement 24VAC

9 VA. With the optional accessories (Oulink /GSM and external display) 12VA

Power requirement 24VAC 

4W.  With the optional accessories (Oulink/GSM and external display) 6.5W

Measurement inputs

 

15 pcs, programmable

Sensor measurement  (inputs M1...M15)

15 pcs passive sensors (NTC10, Pt1000, Ni1000) 
Measurement channel accuracy: 
- NTC10 element: +0,1 ºC between -50 ºC…+100 ºC, 
 +0,25 ºC b100 ºC…+130 ºC

- Ni1000 and Pt1000 element: +0,5 ºC between -50 ºC…+130 ºC

- Also sensor tolerances and the effect of cables must be considered 
when calculating total accuracy 

 

Digital inputs (inputs M1...M15)

15 pcs. 

Contact voltage 5 Vdc, Switching current 0.5 mA  

Transfer resistance max. 1,9 Ω (closed), min. 11 k Ω (open). 

Voltage measurement (inputs M11...M15)

5 pcs active sensors 0-10 V (M11...M15, from HW ver. 1.0)

Analog outputs

 

(Y1-Y4) 

4 pcs. Output voltage range 0…10 V. 
Output current max 10 mA /output 

PWM output

 

1 piece that works in parallel with the Y1 output . The open circuit volt-
age of 15V.Output current is max. 50 mA, when output voltage is 10V

 

Relay outputs NO R1-R5

6 pcs, 230V 5A

Data transfer connections

     RS-485-bus (A1, B1 and A2, B2) 

     RS-232 

    RS-232

   USB-device

2 pcs, unisolated, supported protocols Modbus-RTU (Modbus RTU master 
or  RTU slave) COM2 and COM4

1, support to the Oulink and GSM modem. COM3 (RJ45). Note GSM modem 
and Oulink can not be at same time.

1, support to the additional control panel (Ouflex C LCD) COM1

OuflexTool online connection, COM5

Freely programmable with Ouman’s Ouflex tool

yes

Ouman ACCESS security solution (option)

yes with Oulink

OPC-UA server (option, release 2017)

 yes, with Oulink2

Optional accessories

  

OULINK-ETH 

OULINK ETH adapter provides Modbus TCP / IP interface for V15 device.

GSMMOD 5

By connecting the GSM modem to the Ouflex M, you can communicate 
with text messages to device and receive alarms to GSM phone. 

Additional Control panel  

The Ouflex C LCD external display is connected to the flap cover over the 
RJ12 jack. Use Ouman cable LCD CABLE M.

Technical information

112mm

70mm

105mm

Содержание Ouflex M





















Отзывы: