
2/4
Products:
EH-60 and EH-686
A
B
C
D
EH-200/
EH-105/
Lämpöässä/
Geopro
yellow
brown
green
jumper wire
Connector cable
C
A
EH-60/
EH-686
green
yellow
brown
Connector cable
Power supply
230V/12VDC
Power (5–32VDC) is supplied to the modem using either the mains adapter or
the battery cable
Products:
EH-200, EH-105,
Lämpöässä and
Geopro
If EH-60 or EH-686 has a battery
backup, connect the operating vol-
tage directly to the battery charger-
power source, AP1. (A power supp-
ly is not needed).
12 VDC
Black
Red
Power supply cable to
5...32V operating voltage
Installation
Press the small black push-button at the end of the
modem and pull the SIM card slot out of the modem at
the same time. Place the SIM card in the slot and push
it back into place.
To be able to use the SMS-connection, the PIN code
has to be installed in the controller. Note. The controller
is given the same PIN as that of the SIM card.
The SIM
card’s PIN query must be on.
The
EH-60/EH-686
should
be powered off after the
modem is connected so that
the device will recognize the
modem.
Connecting the GSM modem to Ouman regulation and control devices
Use a DIN rail to fasten the modem into place. Attach
the DIN rail to the wall.The modem has a preattached
plate that can be attached to the DIN rail.
Place the upper edge of the plate above the upper
edge of the DIN rail.
Lower the modem so that the spring on the base be-
comes taut against the DIN rail and the hooks on the
upper edge of the plate go into place on the DIN rail.
Press the lower edge of the modem against the rail
so that the hooks on the lower edge of the plate be-
come attached to the rail.
When connecting the
EVO-model modem to a
EH-200-series controller
or to EH-105, EH-60,
EH-60, use the blue
cable.
When connecting the
modem to EH-net, use
the cable that comes
with EH-net.
Installing SIM card
SIM card slot
SIM card push-button
Antenna
attachment
Modem
Atachment plate
Plate spring which
is taut
A modem which is attached to the
wall, viewed from the back
DIN-rail
Attachment hook
for DIN-rail
Modem with
preattached
plate