8
SELECTION OF INSTALLATION LOCATION
Basic requirements
Installing the unit in the following places may cause malfunction. If it is unavoidable, please consult
a qualified person:
• A place with strong heat sources, vapors, flammable or explosive gas or volatile objects spread in
the air.
• A place with high-frequency devices (such as welding machine, medical equipment).
• A place near coastal regions.
• A place with oil or fumes in the air.
• A place with sulphurous gas.
• Other places with special environment.
• In a laundry room, near a bath, shower or swimming pool.
Note:
The power cords and connection lines of the indoor and outdoor units must be at least 3.3 ft. (1 m) away
from the TV set or radio to avoid image interference and noise ( even if the clearance distance is kept,
noise may be produced due to strong electromagnetic wave).
Indoor unit
• This unit should be recessed mounted in the ceiling.
• There should be no obstruction near air inlet and air outlet.
• Select a location where the drain pipe can be easily connected to the outside.
• Select a location which is convenient to connect the outdoor unit and which is the closest possible
to the power supply.
• The location and hanger should be able to withstand the weight of indoor unit and will not increase
noise and vibration.
• Make sure that the installation follows the requirement of clearance distance diagram.
• Do not install the indoor unit right above an electric appliance.
• The indoor unit should not be exposed to direct sunlight.
• Please try your best to keep the unit away from fluorescent lamps.
