13
Initial temperature setting between 21 °C to 27 °C (69 °F to 81 °F):
Temperature setting will be decreased of 1 °C (1 °F or 2 °F) every hour up to 2 °C (3 °F or 4 °F) and will be
maintained for the duration of the SLEEP mode.
Initial temperature setting between 28 °C to 30 °C (82 °F to 86 °F):
Temperature setting will be decreased of 1 °C (1 °F or 2 °F) every hour up to 3 °C (5 °F or 6 °F) and will be
maintained for the duration of the SLEEP mode.
• Sleep 3
This SLEEP setting allows you to make your own program. You can program the temperature setting for
up to 4 periods after the activation of the SLEEP function:
• 1 hour
• 2 hours
• 3 hours
• 8 hours
Under SLEEP 3 setting, press the TURBO button for a few seconds until “1hour” is displayed on the
screen. The setting temperature of the last sleeping curve setting will be displayed and will blink.
Press “+” or “-“ button to set the desired temperature.
Press TURBO button to confirm and switch to the next period.
Repeat the previous 2 steps until the desired temperature is set for all 4 periods.
9. TEMP button
When pushing this button, you can choose the temperature you wish to see on the indoor unit display:
set temperature, indoor room temperature or outdoor temperature.
• When
" " or “ no display” is displayed, the set temperature is shown.
• When
" " is displayed, indoor room temperature is shown.
• When
"
" is displayed, current outdoor temperature is shown.
NOTE:
Current outdoor temperature is not available on all models. In that case, the set temperature is shown.
10. QUIET button
When QUIET function is on, the unit operates at very low speed to lower the sound level at its minimum.
You can also chose the AUTO QUIET function.
Under this function, in HEAT mode, the device will either run at medium or low (QUIET) speed according
to the difference between ambient and set temperature.
In COOL mode, the device will either run at low-medium speed or low (QUIET) speed according to the
difference between ambient and set temperature.
When you press this button, icon " " (QUIET) appears on the screen. Press the button again to see the
icon (AUTO QUIET) and another time to cancel QUIET function.
