12
6. I FEEL button
Press this button to activate I FEEL function and the icon "
" will appear on remote control. Once this
function is settled, remote control sends the information about room temperature to the control panel
and will adjust automatically. Press again this button to cancel I FEEL function and the icon disappears.
Please put remote control near the user when this function is chosen. Do not put remote control near
something at high or low temperature in order to prevent false results.
Make sure to keep the minimum distance recommended between the remote control and the appliance.
7. AIR button
This function is not available on models presented in this manual.
8. SLEEP button
SLEEP function is available in COOL (cooling), DRY (dehumidifier) and HEAT (heating) modes only. This
function permits to gradually increase or decrease room temperature, so you can save energy without
affecting your sleep. This function is settled over an 8-hour period. After this period of time, the device
will work on previous established parameters, as it was set before SLEEP function was activated.
Press this button to select one of the three SLEEP settings: Sleep 1 (
), Sleep 2 (
) or Sleep 3 (
).
The corresponding icon will appear on the remote control.
•
Sleep 1:
In COOL or DRY mode:
One hour after activation, the temperature setting will increase of 1 °C (1 °F or 2 °F). After 2 hours,
it will increase of 2 °C (3 °F or 4 °F).
In HEAT mode:
One hour after activation, the temperature setting will decrease of 1 °C (1 °F or 2 °F). After 2 hours,
it will decrease of 2 °C (3 °F or 4 °F).
•
Sleep 2:
In this mode, the appliance will run according to a group of preset sleep temperature curves.
COOL
mode:
Initial temperature setting between 16 °C to 23 °C (61 °F to 74 °F):
Temperature setting will be increased of 1 °C (1 °F or 2 °F) every hour up to 3 °C (5 °F or 6 °F). One hour
before the end of the SLEEP mode (after 7 hours), the temperature setting will be decreases of 1 °C (1
°F or 2 °F).
Initial temperature setting between 24 °C to 27 °C (75 °F to 81 °F):
Temperature setting will be increased of 1 °C (1 °F or 2 °F) every hour up to 2 °C (3 °F or 4 °F). One hour
before the end of the SLEEP mode (after 7 hours), the temperature setting will be decreases of 1 °C (1
°F or 2 °F).
Initial temperature setting between 28 °C to 29 °C (82 °F to 85 °F):
After one hour, temperature setting will be increased of 1 °C (1 °F or 2 °F) and will be maintained for
6 hours. One hour before the end of the SLEEP mode (after 7 hours), the temperature setting will be
decreases of 1 °C (1 °F or 2 °F).
Initial temperature setting 30 °C (86 °F) or above:
The unit will keep the initial setting. No temperature setting increase.
HEAT
mode:
Initial temperature setting 16 °C (61 °F) or below:
The unit will keep the initial setting. No temperature setting decrease.
Initial temperature setting between 17 °C to 20 °C (62 °F to 68 °F):
After one hour, temperature setting will be decreased of 1 °C (1 °F or 2 °F) and will be maintained for
the duration of the SLEEP mode.
