background image

2

IMPORTANT SAFETY WARNINGS

THIS OTTO NOIZEBARRIER® TAC HEADSET REDUCES EXPOSURE TO NOISE AND LOUD 

SOUNDS THAT CAN DAMAGE HEARING. BE SURE TO FOLLOW THE INSTRUCTIONS 

IN THIS MANUAL CAREFULLY. FAILURE TO FOLLOW THESE RECOMMENDATIONS 

MAY SEVERELY REDUCE THE AMOUNT OF HEARING PROTECTION PROVIDED BY THE 

HEADSET. 
• 

Use the NoizeBarrier TAC at all times in noisy surroundings 

• 

Misuse of or failure to wear hearing protection when exposed to hazardous noise 

may result in hearing loss and/or injury. If you experience symptoms of hearing inju

-

ry (ringing in ears, dulled hearing, headaches), contact your supervisor or a medical 

professional immediately.

 

• 

The headset must be fitted, adjusted and maintained in accordance with manufac

-

turer’s instructions to achieve the expected attenuation and hearing protection. 

Failure to do so may result in hearing loss and/or injury. 

• 

The headset must be worn at all times in noisy environments to avoid hearing loss/

injury. 

• 

The NoizeBarrier TAC headset provides audio signal sound pressure level limitation 

to limit the radio transmission audio signal to 82 dBA effective to the ear. 

• 

The headset is provided with level-dependent attenuation. The wearer should check 

correct operation before use. If distortion or failure is detected, the wearer should 

refer to the manufacturer’s advice for maintenance.

• 

The thermoplastic polyurethane foam ear seals on the NoizeBarrier TAC may dete

-

riorate with use and should be examined at frequent intervals for damage, such as 

cracking and leakage. Replace as recommended on page 9.

• 

Using cloth hygiene covers over the foam ear seals may affect the acoustic perfor

-

mance of the headset. 

• 

The audibility of warning signals at a specific workplace may be impaired while 

using the NoizeBarrier TAC headset if the situational awareness functionality is not 

activated.

• 

The NoizeBarrier TAC Headset may be adversely affected by certain chemical sub

-

stances. Further information should be sought from the manufacturer.

• 

Warning: performance may deteriorate with battery usage. The typical period of con

-

tinuous use that can be expected from the headset battery is 72 hours.

• 

This ear-muff is provided with electrical audio input. The wearer should check cor

-

rect operation before use. If distortion or failure is detected, the wearer should refer 

to the manufacturer's advice.

• 

Warning – The output of the electrical audio circuit of this hearing protector may 

exceed the daily limit sound level.

• 

This headset is provided with level-dependent attenuation. The wearer should check 

correct operation before use. If distortion or failure is detected, the wearer should 

refer to the manufacturer's advice for maintenance and replacement of the battery.

• 

Warning – The output of the level-dependent circuit of this hearing protector may 

exceed the external sound level.

Содержание NoizeBarrier TAC














Отзывы: