3
Mounting the drum brake
Rear wheel adapter M / M2 / M3 / M6:
First fix the triangular, black metal plate below the
two screws of the rear wheel adapter as shown in
the photo. Remove the standard fitting and attach
the brake component group with the long fitting to the
rear wheel adapter in the desired position. Screw the
rotation protection to the triangular metal plate while
placing the spacer sleeve between the parts. Finally
fix the fitting to the inside of the rear wheel adapter
with washer and nut.
Setting the brake handle of the drum brake and
of the wheel lock for user and attendant
After correct positioning of the brake cables, adjust the
tension of the cables such that the brake / wheel lock
is open with released brake handle and that it safely
blocks when the handle is manipulated.
Please also observe the information given in the in-
structions for use manual.
Positioning of the brake cables in case of drum
brakes and wheel locks for user and attendant
Feed the brake cables from inside through between
the side panel and central unit. Make sure that the
wheelchair can still be folded without trapping the
brake cables.
Rear wheel adapter M4 / M5:
First remove the standard fitting. Then screw the rota-
tion protection to the adapter. Next, insert the brake
component group with the long fitting into the adapter,
bring the nose of the rotation protection into the bracket
provided for this purpose and fix the fitting with washer
and nut on the inside of the rear wheel adapter.
