3
Setting or replacing the calf pads of the elevating
footrests
After loosening the screw in the clamping unit the calf
pad can be adjusted in height.
After completely loosening and removing the screw
connection the calf pad can be removed.
For reassembly, snugly tighten the screw connec-
tions.
Setting the lower leg length / Replacing the footrest
bar in case of footrests with footrest holder
After loosening the set screw the footrest bar can
be adjusted or completely pulled out of the footrest
holder.
Adjusting the angle of the plastic footplate
Loosen the lower screw of the two screws on the
footplate holder as shown in the photo and move the
footplate to the desired angle position. Then clamp the
footplate again by tightening the screw.
Setting the lower leg length / Replacing the footrest
bar in case of elevating footrests
After loosening the screw (arrowed) the footrest bar can
be adjusted in length. After loosening and removing the
screw the footrest bar can be pulled out completely.
