Otto Bock SKIPPI, Инструкция по эксплуатации

Страница: 57 / 68

Component Activity Prior to
every use Weekly Monthly
Check whether the battery charger is functioning prop­
erly (inform qualified personnel of any LED error mes­
sages) X Electronics
Check plug connections X
When brake is disengaged: check whether the LED
indicator on the control panel is flashing X Brake
When brake is engaged: check braking function by try­
ing to push the chair X
Visually inspect all moving components and cabling for
damage X Power seat adjust­
ments
Check that screw connections are tight X
Check whether mounting screws are fastened properly X
Check whether screw connections between the armrest
and the control unit are tight X
Side panel and
armrest
Check armrest for damage X
Gas compression
spring or actuator Visually inspect the piston rod for scratches and oil
leaks X
Product Check the legibility and completeness of all labels and
markings on the product X
9.3 Repair
WARNING
Prohibited repairs
Severe user injuries, damage to the product due to adjustment and installation errors
►
Only carry out the repairs described in this section.
► Other repairs may not be completed by the product user but only by instructed, qualified personnel.
9.3.1 Replacing a defective fuse
INFORMATION
When replacing, only use fuses of the same type. Note the printed rating.
To replace a fuse: see Page 19.
Should the fuse burn out repeatedly after a short time for no discernible reason, contact the qualified personnel.
9.3.2 Wheel replacement
CAUTION
Uncontrolled movements of the power wheelchair
Crushing, pinching, blows due to non-observance of repair instructions
►
When jacking up, secure the power wheelchair to prevent it from slipping or tilting to the side by placing a
suitable base under the drive unit bracket.
► Ensure that body parts, such as hands or head, are never in the danger zone.
57 Skippi
Maintenance and repair