Otto Bock Skippi plus, Инструкция по эксплуатации

Страница: 63 / 76

8.18 Care
8.18.1 Safety instructions
CAUTION
Lack of or improper cleaning
Health hazard due to infections, damage to the product due to user error
► Clean the product at regular intervals.
►
Water must not come into direct contact with the electronics, motor or batteries under any circumstances dur­
ing cleaning. Never use a water jet or high-pressure cleaning apparatus to clean the product.
► To avoid contamination with germs, clean seat cushions and back support upholstery whenever they get
soiled.
► Check the driving behaviour of the product after cleaning it.
INFORMATION
Piston rods do not require lubrication. They are maintenance-free.
8.18.2 Cleaning
Clean the product regularly depending on the degree of soiling and frequency of use, at least 1x per month :
• Clean the control panel, battery charger, armrest and trim components with a damp cloth and mild cleaning
solution.
• Use a dry brush to clean the seat and back upholstery as well as the seat cushion.
• Use a damp plastic brush to clean the wheels and frame.
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Do not spray the product with a pressure washer.
• Observe additional cleaning instructions in the section "Lap belt": see Page 44.
8.18.3 Disinfection
1) Thoroughly clean the pads before disinfecting.
2) Wipe all parts of the product with a disinfectant.
Important information about disinfecting
• Only use colourless water-based disinfectants. Observe the instructions for use provided by the manufacturer.
• Prior to disinfection, clean the seat and back padding, control panel and armrests.
9 Maintenance and repair
9.1 Maintenance
WARNING
Insufficient maintenance
Severe user injuries, damage to the product due to failure to observe maintenance intervals
►
Only carry out the maintenance tasks described in this section. All other maintenance and service tasks may
only be carried out by qualified personnel.
► The functionality and operating safety of the product must be verified and a service performed at least
once per year
.
►
For users with a changing anatomy (for example body dimensions, weight) or users with a changing clinical
picture, have the product inspected, adjusted and serviced at least
once every six months .
WARNING
Failure to inspect important product features
Severe user injuries, damage to the product due to maintenance errors
►
Inspect the seat adjustment features for visible signs of damage at least 1 x per month and ensure all screw
connections are tight.
► Maintain sufficient air pressure in the tyres. The correct tyre pressure is printed on the tyre casing and listed
in the section "Technical data".
• The function of the product should be checked before each use .
63 Skippi Plus
Maintenance and repair