Otto Bock Invader 480S26 10000 K, Инструкция по эксплуатации

Страница: 24 / 48

30
9.3.1 Removing and fastening the calf strap
The calf strap offers additional support for the user's legs (see fig. 31). It can be removed for cleaning.
Fastening the calf strap
1) Open all hook-and-loop closures.
2) Loop the calf strap around the frame tubes (see fig. 32).
3) Adjust the length and fasten the hook-and-loop closure.
Removing the calf strap
1) Open all hook-and-loop closures.
2) Remove the calf strap from the frame tube.
31 32
9.4 Seat and back upholstery
WARNING
Seat cushions and back support pads may ignite
Burns due to user error
►
The seat and back support upholstery as well as seat cushions, padding and covers fulfil the normative
requirements for flame resistance. However, they may still ignite if fire is handled improperly or negligently.
► Keep away from all ignition sources, especially lit cigarettes.
CAUTION
Wear of the seat and back upholstery
Loss of functionality due to prohibited continued use
► Have the seat and back upholstery replaced immediately in case of damage.
The product is equipped with seat and back upholstery. Hook-and-loop fasteners on the seat upholstery are used
to attach the seat cushion. The seat cushion ensures pressure relief during use of the wheelchair. It was chosen by
qualified personnel according to the needs of the user.
24
Use
Invader 480S26=10000_K