Otto Bock Hubfix II Скачать руководство пользователя страница 3

Страница: 3 / 13

1 Perface

Thank you for choosing the HUBFIX bath lift, a quality product from Otto Bock. This manual is intended to help

you enjoy long reliable service from this bath lift as an invaluable everyday aid.

This booklet shows how to use it correctly, and briefly introduces you to necessary product care and servicing.

Please read carefully through the following tips and instructions to get the most out of the HUBFIX and to avoid

any damage that might be caused by using it incorrectly.

If you have any questions or problems relating to this information then please ask your Otto Bock dealer for

assistance.

We hope that you experience trouble-free use of this product, that it meets your expectations, and that it is truly

helpful.

2 Intended use

The HUBFIX bath lift has been designed as a lifting platform for bathing seats.

It allows you to quickly and easily lift people into and out of the bathtub. Otto Bock recommends using its Robby

and Flipper bathing and care seats. Even agitated children can be tended to without unnecessary back strain,

first in the bath lift's upper position at bathtub rim level (straps may be needed), and then lowered to the bottom

of the tub.

Its hydraulic system requires no troublesome connections to the water supply or electrical power sources.

Its big suction cups and rubber feet insure it sits securely in the bathtub.

The hydraulic mechanism makes lifting the child out considerably easier and can be locked firmly at any position

when raising or lifting.

3 Statement of conformity

Otto Bock declares that the HUBFIX bath lift fully conforms to the requirements of standard 93 / 42 / EWG.

4 Service and repairs

Only approved Otto Bock dealers may service or repair the HUBFIX bath lift. If you have problems with it,

please contact the dealer who supplied it to you, since they use only original Otto Bock parts.

Your approved Otto Bock specialist is:

647G154_GB_inhalt

13.02.2004, 11:19 Uhr

Содержание Hubfix II














Результаты поиска

Содержание Hubfix II

Отзывы:

Похожие инструкции для Hubfix II

Бренды по названию

Популярные бренды

Otto Bock Hubfix II, Инструкция по эксплуатации

Результаты поиска

Содержание Hubfix II

Отзывы:

Похожие инструкции для Hubfix II

Бренды по названию

Популярные бренды