20
Figure 25
Figure 26
To remove the bathing seat repeat the above steps in reverse order.
Robby bathing seat:
Keep the release buttons on the locking joints pressed in as you pull it out (Figure 25).
Flipper bathing seat:
First fold the Flipper bathing seat's head section completely forward.
As you pull it out, fold the rear frame inwards (Figure 26).
14 Raising and lowering
Figure 27
Figure 28
The HUBFIX bath lift can be stopped at any position when raising or lowering it.
Raising or lowering is only possible when the release button is pressed in (Figure 27).
The speed of raising and lowering depends on the pressure applied to the release button and can be finely
controlled.
Lowering:
Put the fingers of one hand around the release knob.
Hold onto the frame of the firmly attached bathing seat with the other hand (Figure 28).
Press the release button with your thumb and lower the bathing seat into the bathtub cushioned by the hydraulic
spring.
647G154_GB_inhalt
13.02.2004, 11:20 Uhr
20
