Otto Bock BRAVOracer, Руководство по обслуживанию

Страница: 36 / 48

4
Note!
Any existing frame options (tip-assist, anti-tipper, crutch holder, transport
wheels) must be moved to the rear axle during installation (see Section 4.).
4.7.5 Retrofitting the rear wheels with drum brakes
First proceed as described in Section 4.7.. Unscrew the fitting from the camber adapter by
hand.
a) Mounting the brake drum:
To secure the
brake
drum using the supplied extension fitting in the camber adapter, proceed as
follows: Insert the fitting through the
brake
drum. Place the smaller counter nut onto the fitting
(Figure 7), followed by the larger counter nut (Figure 8).
Push the fitting through to the camber adapter while holding the counter nuts in the centre of the
fitting (Figure ). Tighten the fitting until the mounting place for the
brake
drum is flush with the
camber adapter (Figure 00). Tighten the two counter nuts.
7 8
00