Otto Bock BRAVOracer, Руководство по обслуживанию

Страница: 35 / 48

4.7.3 Replacing the fitting and camber adapter
First proceed as described in Section 4.7. to remove the U-shaped component. Loosen the
counter nut on the exposed rear wheel fitting (Figure 4). Unscrew the fitting from the camber
adapter by hand.
To remove the camber adapter, drill out the rivet indicated in the illustration (Figure 5).
Remove the camber adapter from the axle. Replace worn parts with new ones where required
and / or replace the camber adapter with a different version. Follow this procedure on both
sides.
For assembly, please proceed in reverse order.
4 5
4.7.4 Installing a wheelbase extension
First proceed as described in Section 4.7. to remove the U-shaped component on both sides.
Insert the pre-assembled wheelbase extension into the adjustment tube over the rear wheel axle
in place of the standard U-shaped components (Figure 6).
6
Use the stops and cap nuts to secure the wheelbase extension in exactly the same way as the
standard U-shaped component.