Otto Bock AxonArm Ergo 12K501, Инструкция по эксплуатации

Страница: 16 / 20

7.7 Open the Axon-Bus Gripping Component in an Emergency
This safety function allows the Axon-Bus gripping component to be opened regard­
less of the control signals present.
1) With the Axon-Bus prosthetic system switched on, press the charging receptacle
button and hold for approximately three seconds until the Axon-Bus gripping
component begins to open. A pulsating beep sounds as it opens.
2) Releasing the button immediately stops the process of opening the Axon-Bus
gripping component and turns the entire Axon-Bus prosthetic system off.
7.8 Bluetooth Function
Pressing the button in the charging receptacle and holding for more than four seconds with the Axon-Bus prosthet­
ic system turned off activates the Bluetooth function of the connected AxonMaster 13E500. The blue LED lights up.
Once a connection to the PC has been successfully established, the LED flashes blue.
7.9 Beep Function
Action Beep
1x long
Beep
2x short
Beep
3x short
Beep
1x short, 1x
long
Beep
Pulsating
Turn the Axon-Bus pros­
thesis solution on
Push the button for one to
four seconds.
Turn the Axon-Bus pros­
thesis solution off
Push the button for more
than one second.
Charge the Axon-Bus
prosthesis solution
Connect the charging
plug, charging begins.
Stop charging
Disconnect the charging
plug. Charging ends and
the Axon-Bus prosthesis
solution is switched off.
Empty battery indicator
Turn Bluetooth function
on
(if the Axon-Bus pros­
thesis solution was previ­
ously switched off)
Push the button for more
than four seconds.
Emergency opening of
the Axon-Bus terminal
device
Push and hold the button
for about three seconds
until the Axon-Bus terminal
device opens.
7.10 Data transfer between the product and the PC
Product settings using the adjustment software can only be made via Bluetooth data transfer. For this purpose, a
Bluetooth wireless connection must be established between the product and the PC using the “60X5=* BionicLink
PC” Bluetooth adapter. The installation and use of the “60X5=* BionicLink PC” adapter are described in the
instructions for use included with the adapter.
16
Handling
AxonArm Ergo 12K501=*