Otto Bock Avantgarde Teen2 T, Инструкция по эксплуатации

Страница: 6 / 32

3.2 General safety instructions
CAUTION
Use of unsuitable tools
Pinching, crushing or damaging the product due to use of unsuitable tools
► When completing the tasks, only use tools that are suitable for the conditions at the place of work and for
which safety and the protection of health are assured with proper use.
►
Observe the specifications in the section "Required Tools".
NOTICE
Tipping or falling of the product
Damage to product due to lack of attachment
►
When you work on the product, secure it so that it cannot tip over or fall over.
► Use a clamping fixture to secure the product whenever you work on it at a workbench.
3.3 Safety Instructions for Assembly
WARNING
Changed diameter/installation position of the wheels
Tipping, falling over of the user due to blocked wheels
► Modification of the size and position of the front wheels and of the drive wheel size can lead to wobbling of the
front wheels at higher speeds. If changes are required, verify the horizontal alignment of the wheelchair frame
(see the section "Adjusting the drive wheels", "Adjusting the caster wheels").
WARNING
Improper assembly of removable wheels
Tipping, falling over of the user due to wheels coming off
► After each assembly, verify the proper fit of the removable wheels. The quick-release axles must be firmly
locked in the wheel attachment.
3.4 Further information
INFORMATION
The serial number required for enquiries and orders can be found on the nameplate. For explanations of the
nameplate, see the section "Nameplate" (see Page 6).
3.5 Nameplate
The nameplates are found on the frame.
Label Meaning
A Manufacturer’s product name
B CE marking
C Maximum load (see section “Technical data”)
D Manufacturer information/address
E Serial number
1)
F Manufacturing date
2)
G Symbol for medical device
H WARNING! Read the instructions for use before using the
product. Observe important safety-related information
(e.g. warnings, precautions).
I Manufacturer’s reference number for the product variant
J Serial number (PI)
3),1)
K Global Trade Item Number (DI)
4)
1)
YYYY = year of manufacture; WW = week of manufacture; PP = production site; XXXX = sequential production
number
6
Safety
Avantgarde Teen2 T,
Avantgarde Teen2 VR