Otto Bock Avantgarde CLT, Руководство по обслуживанию, Страница: 11 / 64

9 10
3.6.1.3 Replacing the Cross-Brace/Cross-Brace Bracket
INFORMATION
►
The frame components are no longer properly connected when the crossbrace is removed. Carefully lay the
frame components on the work surface after removing the crossbrace.
1) Remove both front parts of the frame (see Page 9).
2) Unscrew the crossbrace centre screw and remove (see fig. 11).
3) Remove the crossbrace bracket retaining clip (see fig. 12).
4) Remove the end caps (see fig. 13).
5) Remove the crossbrace upward (see fig. 14) and replace.
6) To reassemble, perform these steps in reverse order. Tighten the centre screw to the point that folding without
jamming is possible.
11 12
13 14
3.6.1.4 Replacing the Joint Tubes
1) Remove the front part of the frame (see Page 9).
2) Unscrew the rear wheel adapter and remove (see Page 9).
11 Avantgarde CV / CS / CLT
Service Work