Otto Bock 9B500-S CLASSIC, Инструкция по эксплуатации

Страница: 50 / 84

50 | Ottobock B500-S classic
► During installation of the Recaro seat, ensure that the
seat clip is engaged firmly in the clips.
►
Ensure that the front locking bolts are engaged up to
the key ring.
1) Set the back edge of the Recaro® seat onto the end of
the seat frame.
2) Push the seat forward until the rear seat clip protrudes
into the bracket.
3) Tip the seat forward until the locking bolts engage with
the seat frame (see Fig. 27, item 2).
CAUTION! Visually inspect and shake the seat to
ensure secure locking.
→
The Recaro® seat is installed.
Fig. 27 Releasing/locking the Recaro® seat
1 Release strap 2 Locking bolts
Adjusting the Recaro® seat
INFORMATION
To adjust the back angle of the Recaro® seat: see Page 14.
Adjusting the lateral supports in the lumbar region
INFORMATION
This information only applies to the Recaro® LT model.
1) Turn the knob on the side of the backrest forward.
→ Both lateral supports are moved closer together.
2) Turn the knob on the side of the backrest backwards.
Usage