Otto Bock 490E75 1 C Series, Инструкция по эксплуатации

Страница: 69 / 128

5) Disconnect the battery charger plug from the con­
trol panel.
6) Turn the power wheelchair control unit on. The
power wheelchair is ready to use.
54
Charging process via the external charging recept­
acle
1) Turn the control device on the power wheelchair off.
2) Open the charging receptacle (see fig. 54, right).
3) Plug the battery charger plug into the charging
receptacle.
INFORMATION: Please note that charging via
the external charging receptacle may be carried
out at a current of up to 12 A.
4) Connect the battery charger to the mains socket.
→ The charging process starts automatically and
the battery charge level is indicated by the LCD
screen on the control panel and on the battery
charger.
5) Turn the battery charger off and pull the plug out of
the mains socket when the charging process is
complete.
6) Disconnect the battery charger plug from the char­
ging receptacle.
7) Close the charging receptacle (see fig. 54, left).
8) Turn the power wheelchair control device on. The
power wheelchair is ready to use.
7.10 Seat
7.10.1 Safety instructions
WARNING
Seat cushions and back support pads may ignite
Burns due to user error
►
The seat and back support upholstery as well as seat cushions, padding and covers fulfil the normative
requirements for flame resistance. However, they may still ignite if fire is handled improperly or negligently.
► Keep away from all ignition sources, especially lit cigarettes.
NOTICE
Improper use
Damage to the seat surface due to user error
►
Do not allow the seat to come into contact with sharp objects. This also applies to animals such as pet cats
with sharp claws.
► If the seat is expected to come into contact with liquid, such as spilt drinks or episodes of incontinence,
always use it in conjunction with a liquid-repellent cover.
►
Only use the Ottobock incontinence covers for this product. Contact the qualified personnel to obtain a spare
Ottobock cover.
7.10.2 Seat type
INFORMATION
Correspondingly adjusting the centre of gravity is mandatory every time the seat depth is changed. Therefore,
always contact the qualified personnel if necessary after changing the seat position.
The product is equipped with a standard seat.
69 490E75=1_C
Use