Otto Bock 17AD100 Nexgear Tango, Техническая информация

Страница: 12 / 32

Optional:
Fabricate a long foot component.
• Cut 2 layers of carbon fibre cloth to size (fibre ori­
entation:
45°
).
• Position the carbon fibre cloth on the foot compon­
ent.
INFORMATION: A flexible forefoot component is
fabricated in this example.
Position carbon-fibreglass webbing from the heel to the
rollover edge in
a - p
and
m - l
direction.
Apply carbon fibre stockinette (
5 cm
wide) in the lateral
course of the bar.
Optional:
Position 1 layer of Perlon stockinette and 1
layer of decorative fabric as the final layer or use 1 layer
of carbon fibre cloth.
Prepare templates for this purpose. Transfer the blanks
to the carbon fibre cloth and cut them out.
12
Procedure
17AD100