100% DelighteD…guaranteeD.
You’ve got your OttLite product—sweet! It’s important to us
that you are 100% delighted with our products from day one
and beyond. Register your product using the enclosed Product
Registration Form or online at
Warranty.Ottlite.com
, and if
anything ever happens to your OttLite we’ll be able to help you
lickety-split.
Warning:
To prevent electric shock, make sure the lamp is
not plugged in until all assembly steps are complete.
laMP aSSeMBlY
1.
Unpack fully assembled lamp and single-packaged bulb.
2.
Lay out lamp with the base
(a)
lying flat on a steady surface.
3.
Install Bulb
(g)
. See
BulB inSertiOn/reMOVal
instructions.
4.
Plug the lamp into a standard 120V outlet.
5.
To turn the lamp
On
or
OFF
rotate cord mounted switch
(h)
clockwise.
6.
To position the shade
(F)
up or down loosen thumbscrew
(D)
turning counterclockwise, reposition shade
(F)
, then
tighten thumbscrew
(D)
turning clockwise by hand until
tight; to facilitate movement, grasp the shade at the top
(e)
and gently move it.
7.
To adjust the position of lamp body move upper arm
(C)
. Loosen thumbscrew
(B)
turning counterclockwise,
reposition upper arm
(C)
, then tighten thumbscrew
(B)
turning clockwise by hand until tight.
nOte:
Upper Arm
(C)
movement is limited to max position as detailed in diagram,
Figure 1
.
DO nOt
try to move arm past position detailed in
diagram,
Figure 2
, due to potential tip hazard.
8. DO nOt
try to rotate the shade sideways as the lamp may
be damaged.
BulB inSertiOn anD reMOVal
1.
Make sure that the lamp is not plugged into an electrical
socket.
2.
If the lamp has been in use, allow it to cool approximately 5
minutes before proceeding.
3.
To install a bulb
(g)
in the socket, hold bulb
(g)
firmly near
the base, align bulb pins with mating pin-holes in socket
then push it straight into the socket until it “snaps” into
place.
4.
To remove a bulb
(g)
already installed in the lamp, grasp it
firmly at the base and using a slight rocking motion, pull it
straight out of the socket.
DO nOt
twist or turn the glass
part of the bulb.
DO nOt
allow bulb to strike the shade.
Please note that in operation, OttLite bulbs are not
dimmable.
enjoy your 13w articulating Desk lamp!
This lighting system is designed for use with OttLite type
K
(style number SB13-K). Use of other products voids the
warranty and may result in damage to the lighting system.
For more information on purchasing replacement tubes/bulbs
please go to www.OttLite.com/replacement13wtube
CAUTION!
If the external flexible cable or cord of
this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or its service agent or a similar qualified person in
order to avoid a hazard. Indoor use only.
CAUTION!
To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
CAUTION! ImpOrTANT sAfeTy
INsTrUCTIONs:
This portable lamp has a polarized
plug (one blade is wider than the other) as a feature to reduce the
risk of electric shock. This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
This product complies with Part 18 of FCC Rules, but may cause
interference to radios, televisions, wireless telephones, and remote
controls. Avoid placing this product near these devices. If interference
occurs, move the product away from the device or plug either into
a different outlet. Do not install this product near maritime safety
equipment or other critical navigation or communication equipment
operating between 0.45-30 MHz.
English
13w Articulating Desk Lamp
INS130059 REV031213
13w Articulating Desk Lamp
13N86006, 13N82906, 13N82MB6
S2280
b
C
E
D
H
A
F
G
Figure 1
Figure 2
