background image

 

 

Congratulations on the recent purchase of your new Stealth 2000 by Otter Outdoors!  You have  
Purchased a boat from one of the leading manufacturers of hunting & ice fishing gear!.  Your  
Boat represents years of commitment to product design, excellence in engineering and quality 
in manufacturing.  With proper care and maintenance your boat should last for many years to  
come.  
 

 
Manufacturers Statement of Origin (MSO) 

You should receive a MSO with your new boat.  Most states require that you register the boat 
if it has a motor.  Each boat comes with a document called a Manufacturer’s Statement of Origin 
(MSO).  Think of it like the title to your car.  It’s your proof, along with your sales receipt, of  
ownership.  You’ll need both the MSO completed and signed by the retailer and your sales 
receipt to register the boat with the State Department of Motor Vehicles or Natural Resources. 
 

 
Owners Manual 

Keep your owner’s manual for future reference. It is a good idea to write down the following 
Information: 

Serial Number

:      ______________________________ 

 

Date of Purchase

:  ______________________________ 

 

Purchased from

:   _______________________________ 

 

 
 
 
 
 
 

 

Содержание Stealth 1200










Отзывы: