OTT ecoLog 500, Руководство по эксплуатации

Страница: 39 / 56

To prevent unauthorized input of operating parameters, you may protect
the OTT ecoLog 500 (3G) unit and/or
the operating program:
using a separate password for each.
How to protect the operating program using a password
Start the operating program.
From the "File" menu, select the "Options" function.
Enter an eight-digit (max.) password into the "Password" input box. Allowed
characters 0 … 9, A … Z. (This password is independent of the
OTT ecoLog 500 (3G) password.)
Enable the "Only observer mode" check box.
Click the "OK" button.
Close the operating program
➝
The operating program is now protected: The
"Setup device" button in the start window is no longer visible.
Please note:
If the password is lost, you can no longer configure or parameterize the
OTT ecoLog 500 (3G) on this PC. If this occurs contact OTT HydroService.
The password assigned here only applies to the operating program installed
on this PC. The OTT ecoLog 500 (3G) unit is not protected by this password!
How to unlock a password-protected operating program
Start the operating program.
From the "File" menu, select the "Options" function.
Enter the password into the "OTT ecoLog 500 (3G)" window.
Fig. 22: Protecting the operating program
by means of a password – Input window
for defining a password.
A password protected operating program is
reasonable only if the operating program
starts in Observer mode ("Only observer
mode" check box enabled)!
Fig. 23: Unlocking the operating program –
Password input window.
14 Protecting the OTT ecoLog 500 (3G) unit and the
OTT Water Logger Operating Program using a
password
39