OTT ecoLog 500, Руководство по эксплуатации

Страница: 27 / 56

– Establishing up a communication link to the OTT IrDA-Link USB reading head:
Connect the OTT IrDA-Link USB reading head to a USB port on the PC. (USB
interface drivers must be installed, refer to separate installation instructions.)
Place the OTT IrDA-Link USB reading head onto the OTT ecoLog 500 (3G)
infrared interface, refer to Fig. 16.
In the operating program, select the communication path
"IrDA OTT IrDA-Link".
Notes
The built-in infrared interface of a PC (standard for many notebooks) can only
be used with the Windows 95 and Windows NT operating systems!
9.3 Establishing the communication link from remote
(OTT ecoLog 500)
Note
A remote communication connection can only be established with the
OTT ecoLog 500 (not the OTT ecoLog 500 3G)!
If both installation and configuration of the OTT ecoLog 500 have been completed
the communication link may also be established using the cellular network, e.g.
for future modifications to the configuration. To perform these operations, the PC
on which the operating program is executed must be connected to a wired or
GSM modem. For more information, please refer to online help.
Please note: Establishing a communication link using the cellular network may
take up to a minute!
Fig. 16: PC/OTT ecoLog 500 (3G)
communication link.
27