Amplitude
®
T-Series
- Installation Guide
4
Then, plug the power supply into an electrical outlet. Charge the unit for at least 30 minutes prior to first
use. This will ensure that you have a relatively full charge when you begin using the device.
Note that the small green light on the power supply unit will be lit when the charger is plugged in and the
unit is charging. The green light on the Amplitude device will blink slowly while charging when the device is off.
To disconnect the charging unit from the outlet, remove the jack from the device, and then unplug the
charging unit from the electrical outlet.
If you expect to store your audiometer for a period of time between uses, removing the batteries and
storing them separately will help preserve the battery charge.
STEP 3: INSTALLING THE SYMPHONY FOR AUDITBASE SOFTWARE
Insert the Symphony for AuditBase CD. If your computer is set to do so, the installer will start automatically.
(If it does
not
auto start, you will need to navigate to the installer CD in Windows Explorer, then locate and start
the installer file manually.)
As the program prepares for installation, the set-up message below
may
appear indicating that
Microsoft.NET Framework 2.0 needs to be installed. Microsoft .NET Framework 2.0 is required for Symphony for
AuditBase to run properly, and the installer will not work until this step is completed.
The Microsoft .NET 2.0 Framework is available through Windows Update.
Once the .NET 2.0 software is installed, you can continue with the Symphony for AuditBase installation.
