17
7. Completing the chairlift
Before starting completing the chair check if the hinge switches the lift off, when it is fold in.
In this case the display shows 3. ( when fold in not or not completly fold out position)
•
Fit the chairlift with the side caps by hanging the side caps in the holes at the top of the frame,
and next sliding the side caps to the back of the chair.
•
Place the springs over the switch. (left and right side)
•
To assemble the bottom cap to the chair the two holes at the back of the cap have to be
placed over the two synthetic rings at the back of the chair. Hook the bottom cap into the side
caps and place the front of the bottom cap over the synthetic ring at the front of the chair.
•
Next the front plate must be put in place. Hook the front plate in the holes at the top of the
chair and fasten the plate with bolts at the bottom. (2,5 mm hexagon socket wrench)
•
Fit the operation handles of the footrest by pushing them over the pipes and fasten the
handles with bolts in the pipe. (2,5 mm hexagon socket wrench)
Front-plate
hooked in the top
Fasten
frontplate
Side caps frame
Fasten handles
footrest
1 1
2
Synthetic rings
at the back
Bottom-cap hooked
in side-cap
Bottom-cap hooked
In side-cap (mounted)
Bottom-cap hooke
on ring at the front.
