OTIS GEN2 OI-7032, Руководство по эксплуатации

Страница: 54 / 103

Channel Configuration
The following instructions should be consulted when configuring the channels for their corresponding
sensor assemblies.
Once one channel is setup, these settings may be duplicated for all channels by pressing “Duplicate
Setting” on the lower right side of the Touchscreen. Remember, though, that the duplicate settings
feature will duplicate the settings for ALL successive channels.
If the settings of channels need to vary, the differing channels should be setup individually. For
instances in which a minimal number of channel must vary, setup a channel to reflect the majority, then
duplicate that channel's settings. Next, manually setup the few varying channels.
NOTE: The OI-7032 supports a maximum of 32 sensor assemblies. The OI-7032 supports
up to 32 WireFree sensor assemblies; up to 4 wired (4-20mA) sensor assemblies may be
setup in place of 4 of the 32 WireFree sensor assemblies (for a total of 28 WireFree and 4
Wired).
1. Press the WireFree logo to enable the “Channel Config.” button on the Home Screen.
54