oticon amigo FM-CI, Инструкция по эксплуатации

Страница: 10 / 15

No FM Signal
• Turn the processor OFF, then ON to reset the
processor
• Verify that the Amigo receiver gain is on the
correct setting
• Verify that the Amigo transmitter and receiver
are ON and are on the same channel
• Verify that the processor and FM-CI adaptor
have new batteries and that the Amigo trans-
mitter is fully charged
Intermittent Sound
• Turn the processor OFF, then ON to reset the
processor
• Verify that the processor and FM-CI adaptor
have new batteries and that the Amigo trans-
mitter is fully charged
• Verify the Amigo receiver is fi rmly attached to
the FM adaptor and that the FM adaptor cords
are fi rmly attached to the processor
• If an accessory microphone is being used for
the transmitter, make sure that the connections
are clean, fi rmly attached and the cord is not
damaged.
Short FM Range
• For maximum range, the Amigo transmitter
should have the external antenna (or micro-
phone cord) attached and it should be hanging
freely. Do not coil or wrap the antenna around
the transmitter
Static/Interference
• Verify that the correct adaptor cord is being
used
• Change transmitter and receiver channels
• Remove obstructions between transmitter
and receiver
• Move away from sources of EMI (electromag-
netic interference): fl uorescent lights, computer
monitors, televisions, some digital cell phones,
etc.
18 19