English - 6 -
When processing more than one piece, the individual weight of
each jewelry piece should not exceed 8 grams, to avoid dam-
aging each other and leaving impact marks.
As a rule of thumb take a ratio of 1:7 (jewelry pieces : media)
Tip
– Be cautious, always start with a small number of
pieces. You will learn from experience the optimum load. Never
overload, as this will cause pieces to create impact damage
with each other
Q5.
Can the
ECO-mini “wet”
overheat?
A5.
Definitely not. The machine has a thermal switch. In the
unlikely event of it getting too hot, it will stop automatically.
Q6.
Is it possible to process chains with the
ECO-mini “wet”?
A6.
Only partially! Be careful with thin chains (< 3 mm), they
may tie up in knots. Hollow chains may become squeezed flat
(also be careful with necklaces). It is Important to close the
chain fasteners, before you start processing.
We strongly recommend you take care to make sure the pieces
to be processed in the
ECO-mini “wet”
, are not in danger of
being broken by the grinding action. All processing is at the
Customers risk and we are unable to guarantee against dam-
age, or repay any costs for articles damaged.
Q7.
Which kind of alloys can be processed?
