If the yellow LED stays off, then the Ethernet connection to the Ethernet port is
not made. Check your UTP cable and make sure that a straight-through cable is
used for connecting it to a host computer and that a crossover cable is used for
connecting it to a hub or switch. If one cannot communicate and the yellow LED
is on, you may want to re-position the ACR-201-G to a different location for better
RF reception. You may also want to check if the unit is configured with the
proper RF channel and security settings by using the Web-based Utility software.
Refer to Chapter 3 for instructions on how to change the RF channel and security
settings.
For laptop users, once the ACR-201-G radio unit works properly, the unit can be
secured at the top of the laptop LCD display by the provided radio clip as shown
in the following figure.
Ethernet
Connection
Power drawn from the USB
Example of Typical Installation for ACR-201-G
ACR-201-G Technical Manual
4
