OTARI FS-96, Руководство по эксплуатации

Страница: 17 / 28

The FS-96 can handle a maximum of 5 digital audio formats
(ADAT, AES/EBU, SDIF-2, TDIF-1, OPTION). The signals input in
the selected format will be converted to all of the formats
available on the FS-96.
1. Press the SETUP key to place the FS-96 in Setup mode
and select the INPUT FORMAT screen by pressing the
upper & lower Arrow keys.
The current input format is displayed.
2. Press the ENTER key to activate the parameter.
The current selection is displayed with parentheses and the
other choices are displayed on the screen.
3. Select the desired format with the right & left Arrow
keys and press the
ENTER key to store the selection.
The selection is stored into the current setting memory and
is reflected onto the actual setting.
(USE TO SELECT INPUT FORMAT)
■
List of Input Formats: The following input formats are
available in the INPUT FORMAT screen.
■ ■
AES: selects the AES/EBU (AES3) format.
■ ■
ADAT: selects the ADAT optical format.
■ ■
SDIF: selects the SDIF-2 format.
■ ■
TDIF: selects the TDIF-1 format.
■ ■
BDIR: used to place the FS-96 in Bi-Direction mode to
perform bi-directional conversions between the TDIF-
1 and AES/EBU formats. Please refer to “
Using Bi-
Direction mode ” for details (
☞
p.25 ).
■ ■
OPT: selects the signal format of an expansion module
inserted in the option slot.
■
Indication of Input Format: The selection of the input format
will be displayed by the Source indicators on the front panel.
If no signal is present or if no synchronization is achieved for the
input signals, the source indicator will flash to alert the operator.
NOTE: When “BDIR” (Bi-Direction mode) is selected, both the
AES/EBU and TDIF-1 indicators are illuminated.
AES EBU ADAT SDIF-2 TDIF-1 OPTION
INPUT FORMAT: 0
ADAT
ENTER
INPUT FORMAT: 0
AES <ADAT> SDIF
INPUT FORMAT: 0
BDIR < AES> SDIF
INPUT FORMAT: 0
AES
February 2001 17
Setup Mode
Selecting Input Format