①
ON/OFF
Connect the power cord plug to the socket, Turn on the power switch at the back of the machine
and the machine will beep a sound.
②
Oxygen production
Under the power-on state, touch the "on/off" button lightly and the oxygen concentrator starts to
work. The machine will beep a sound.
(3) O2 Flow
Touch the "O2 Flow" button and adjust to the required flow. The oxygen concentration
corresponding to the flow rate is displayed on the display screen. The default start-up flow of this
machine is 2L. The flow of this machine can be adjusted by 2L/3L/4L/5L/7L/9L/10L seven-speed
cycle.
(4) Tim +
Each time you touch the "tim + " button
.
Press the “tim +” button once to count in 1 hour
increments, and the maximum timing is 5 hours.
(5) Tim –
Each time you touch the "tim - " button. Press the “tim -” button once to count down in one hour.
When the timer is set or reduced to "-", it indicates the continuous running state of the machine.
(6) Anion
Touch the "Anion" key to turn on and off the negative ion work.
(7) Smart Alarm
Touch the "Smart Alarm" button and broadcast the assistance-Seeking information continuously
until the function is turned off manually.
(8) Child lock
Gently touch the "Child lock" button, the Child lock opens then other buttons can not work until
closing the Child lock.
Product Description
Operating guide
Timing
Hr
Min
O2
Flow
O2
Purity
L/min
Hrs
Total
Anion Clean Filter Smart Alarm
1. Position as shown is panel switch, press
down to open panel.
Panel switch
2. Remove the humidification cup along the
arrow direction, pull out the silicone plug at
the Water filling nozzle, and add cold
purified water, which can not exceed the
maximum water level. Tighten the silicone
plug on the nozzle, then return the
humidification cup to the machine, press
tightly and cover the panel.
Water filling nozzle
Atomization port
(2) Oxygen-inhalation operation
3. Connect the power cord plug to a socket
with power output.
(1) Preparation
Page 8 of 13
Page 7 of 13
Содержание SYK-608-2
Страница 1: ......
