Preparing To Use Your Countertop Oven for the First Time
If you are using your countertop oven for the first time, please be sure to:
1. Remove any stickers from the surface of the oven.
2. Open oven door and remove all printed documents and paper from inside the countertop oven.
3. Clean the rack, tray, and pan with hot water, a small amount of dishwashing liquid and a non-
abrasive sponge or cleaning pad.
CAUTION: DO NOT IMMERSE THE BODY OF THE UNIT IN WATER.
4. Dry the unit thoroughly before using.
5. Select a location for the countertop oven. The location should be in an open area on a flat
counter where the plug will reach an outlet.
6. Plug the countertop oven into a 120 Volt AC electrical outlet.
Using Your Countertop Oven
Always use door handles when opening and closing the appliance. The doors open to a wide
angle for better access to the oven. You will hear the latch mechanism engage when doors are
fully opened. Doors will not remain open unless the latch mechanism is engaged. Always fully
open doors before accessing oven. Please keep at least 6 inches (152 mm) clear on all sides of the
appliance to allow doors to fully open.
Setting the Clock
Push the Clock button. The clock will flash.
Use the arrow keys to set the hour. Push the Clock button again.
Use the arrow keys to set the minutes.
Push the Clock button once more or the start button and the time will be set.
Converting Temperature Units
When the oven is not in use, press the tempe or - button for 3 seconds to switch to
Fahrenheit or Celsius, respectively. The display will flash 3 times indicating the new temperature
units.
Preheating the Oven
Place oven rack into the desired position before heating the oven. (See “Positioning Rack” Section)
This oven has a preheat feature in turbo convection, bake, air fry, and slow cook mode. Select the
mode, turbo convection, bake, air fry, or slow cook. Use the temp arrow keys to select the desired
temperature. Use the timer arrow keys to select the desired time.
Push the Start button. Display will show PrE until temperature is reached, the oven will beep and
display remaining time. At this time you may adjust the selected time. The temperature may also be
adjusted. If you increase the temperature the unit will go back to preheat mode until it reaches the
new set temperature.
To bypass the preheat function press the start button a second time.
To Use the Bake, Turbo Convection, Air Fry, Roast, Broil, Pizza, or
Wings Functions:
Place oven rack into the desired position before heating the oven. (See “Positioning Rack” Section)
Arrange food on the wire rack, air fry rack, or in the baking pan. For foods with high amounts
of fat or grease, it is recommended to place the Baking Pan below the Air Fry Rack or Wire Rack
during the cooking cycle.
Push the desired preset function. The respective function will light up on the display. Use the
Temperature arrow keys to select desired temperature.
Use the Time arrow keys to select desired time.
Push the Start button.
The oven will go into preheat mode for turbo convection, bake, and air fry. To bypass the preheat
mode press the start button a second time.
English-4
