When the Roasting cycle is complete, the unit will
emit 3 beeps. The LCD and the Start/Cancel Button
Light will turn off after 30 seconds.
NOTE: You can cancel the cooking cycle at any time by
pressing the “Start/Cancel” Button once. The red
Start/Cancel Button light will turn off whenever
a function has been completed or a function is
manually cancelled.
USING THE WARM FUNCTION (SEE FIG. 9)
Step 1. Turn the “Function” Knob to the Warm “ ”
function. When you select the Warm function, the
lower heating element will heat.
Default Temperature: 65°C.
Default Time: 60 minutes.
You may manually activate the Turbo Convection
Heat by pressing the Turbo “ ” button once to turn
it on. The blue light of the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature “ ” Knob if you wish to
increase or decrease the temperature setting. For
the Warm Function, the temperature can be set from
65°C to 95°C in 15-degree increments.
Step 3. To set the time:
Turn the Time “ ” Knob if you wish to increase
or decrease the warming time. The maximum time
setting for Warm is 60 minutes (1 hour). Once you
have selected the desired warming time, press the
Start button to initiate the warming process.
Step 4. To Start:
Press the “Start/Cancel” Button to start the warming
process. The red Start/Cancel Button light will
illuminate. The LCD Display will show the Warm
Function, the countdown time and the selected
temperature. The unit will begin to work and the
timer will start counting down.
14
Figure 9
TSSTTVDFL1-049_14EM1.indd 14
23/07/14 9:46 AM
