5
OPERATION INSTRUCTIONS
Clean your refrigerator thoroughly. Wipe the outside with a soft, dry cloth, the interior with a
clean, moist cloth.
Insert the power cord into the power supply outlet.
Turn the thermostat dial to “7”. Close the door and let the refrigerator operate for 20 minutes.
Reduce the thermostat to a mid-range setting (“4”) on the thermostat control.
•
•
•
•
THERMOSTAT CONTROL
To control the internal temperature, adjust the thermostat dial. “1” is the
warmest setting; “7” is the coldest setting.
To turn the refrigerator off, turn the thermostat dial to “0”. Turning the
temperature dial to “0” stops the cooling cycle but does not shut off the power
supply to the unit. To turn off the power supply, unplug the refrigerator from
the power supply outlet.
The dial may be set any place on the scale. It does not have to be set exactly on
a number.
To make ice cubes in the freezer compartment, adjust the thermostat to the
coldest setting (“7”).
•
•
•
•
DEFROSTING INSTRUCTIONS
Defrost the freezer compartment when the ice/frost is approximately 1/4 inches thick.
Set the thermostat dial to “0” to defrost.
Remove all contents from the freezer compartment.
Leave the freezer door open to allow accumulated ice/frost to melt.
Remove large pieces of ice as needed.
Do not use hot water or other electric heating devices to melt the accumulated ice.
After defrosting, remove accumulated ice/water and wipe the freezer compartment dry with a soft
cloth.
Restart the unit.
•
•
•
•
•
•
•
•
