4
BEFORE USING YOUR REFRIGERATOR
Before connecting the refrigerator to the power supply, let the unit stand upright for 4 hours to
reduce the possibility of the cooling system malfunctioning due to improper handling.
Clean your refrigerator thoroughly before putting into use.
Use the parts diagram to insure proper positioning of internal components.
•
•
•
TIPS FOR SAVING ENERGY
Keep the refrigerator and freezer doors closed as much as possible, especially in warm/humid
conditions.
Maintain adequate ventilation around the back and sides of the refrigerator.
Maintain a thermostat of “4” under normal use.
Allow warm food to cool to room temperature before placing in the refrigerator or freezer.
Excessive ice build up will increase energy consumption. Defrost the refrigerator and freezer when
ice/frost is 1/4” thick.
•
•
•
•
•
INSTALLATION INSTRUCTIONS
Install the refrigerator in a convenient location away from extreme
heat and cold. Allow suf
fi
cient clearance between the refrigerator and
sidewall so the door will open without obstruction. The refrigerator is
not designed for recessed installation.
Select a space with a strong, level
fl
oor. This unit is not recommended
for carpeting or other soft, uneven surfaces.
Allow 5 inches of space between the refrigerator’s side and the wall.
In addition, suf
fi
cient clearance (160 degrees) should be maintained to
allow the door to properly and completely open.
The refrigerator must be correctly connected to the power supply.
Do not use an extension cord.
This refrigerator is not designed to be installed in an outside area such
as a garage or porch. Ambient temperatures below 50 degrees or
above 90 degrees will hinder the performance of the refrigerator.
Wait 3-5 minutes before restarting the refrigerator if you unplug the
unit. The unit may fail to operate if restarted too quickly.
•
•
•
•
•
•
•
