Filling Water Reservoir (use tap water)
1. Turn Steam Lever to
(Dry) and Fabric Select Setting to Off. Unplug.
2. Raise the Water Fill Hole Cover. Hold the iron at a 45 degree angle and use any
easy-pour measuring cup to fill the water reservoir with tap water through the water fill
hole. Do not fill water reservoir beyond maximum fill line.
WARNING: To prevent the risk of burns, be careful when filling a hot iron with water. Hot
metal parts, hot water and steam can cause injuries.
Dry Ironing
1. Ensure Steam Lever is turned to the
(Dry) setting.
2. Plug the cord into a 127V AC outlet.
3. Turn Fabric Select Setting to desired setting. Allow iron to heat for 2 minutes on its
heel rest on a stable, protected surface.
NOTE: While Steam Lever is turned to the
(Dry) setting, you may still use the SHOT
OF STEAM
®
or SPRAY MIST
®
features, as long as the Fabric Select Setting is set to
wool, cotton, or linen. Water reservoir must be at least ¼ full of water.
Steam Ironing
1. Fill Water Reservoir and plug the cord into a 127V AC outlet.
2. Turn the Fabric Select Setting to desired setting. Allow the iron to heat for 2 minutes
on its heel rest on a stable, protected surface. Turn Steam Lever to desired setting.
CAUTION: When not ironing, always set the Steam Lever to (Dry) and the Fabric
Select Setting to OFF.
Special Features
SPRAY MIST
®
FEATURE is a powerful water spray mist that dampens the fabric to aid in
removing wrinkles from heavy fabrics and for setting creases.
TO USE: Press the Spray Mist
®
button firmly.
SHOT OF STEAM
®
FEATURE provides an extra burst of steam for deep penetration of
stubborn wrinkles. You can use this feature while Dry or Steam ironing as long as the
Fabric Select Setting is set to wool, cotton, or linen. The water reservoir must be at least
¼ full of water.
TO USE: Place the iron on top of the wrinkle and press the Shot of Steam
®
button each
time you would like an extra burst of steam. The Shot of Steam
®
feature may be used
continuously in approximately 3-second intervals.
NOTE: Shot of Steam pump may require priming for initial use. To prime simply push the
button firmly 10-15 times repetitively.
VERTICAL SHOT OF STEAM
®
FEATURE allows iron to function vertically as a garment
steamer.
English - 3
GCSTCW-317_GCSTCB-200_19ESM2 (LA).indd 3
9/11/19 08:52
