Oster FPSTBW8050-KIT, Руководство пользователя

Страница: 4 / 12

www.oster.com
6
www.oster.com
7
Operating Instructions
Installing the Batteries
Before using your Wine Opener for the fi rst time install a fresh
set of batteries in the battery compartment as follows:
1 Remove the battery cover
2 Insert 4 AA alkaline batteries into the battery
compartment, observing /- polarities
3 Replace the battery cover
4 Replace batteries when required with only AA alkaline
batteries.
5 Dispose old batteries per local and national laws and
regulations.
To Operate Your
Electric Wine Opener
The Wine Opener is operated
by the simple press of a
switch. Press the lower switch
to remove a cork from a
bottle. Press the upper switch
to release a cork from the
mechanism after you have
removed from the bottle.
(Figure 1)
Before removing the cork you
must remove any foil from
the bottle using the foil cutter
provided. (Figure 2)
1 Place the Wine Opener
on top of the wine bottle
making sure that it remains
as upright as possible at all
times. If you hold the Wine
Opener at an angle to the
bottle it will not remove
the cork properly. (Figure 3)
2 Hold the Wine Opener
fi rmly and depress the
lower part of the switch.
The corkscrew spiral will
turn in a clockwise direction
and enter the cork, then
gradually remove it from
the bottle. When the Wine
Opener mechanism has
stopped the cork has been
fully removed from the
bottle.
Up
Down
Figure 1
Figure 2
Figure 3