Ossur Rebound, Инструкция по эксплуатации

Страница: 5 / 33

5 4
– Note: Walker circumference (around calf) can be widened by
cutting Flex Edge
®
(Fig. 3 & 4)
3. Wrap liner securely around foot then leg (Fig. 5) .
4. Place front shell over ankle making sure that the air bulb is aligned
with the opening (Fig. 6) .
5. Fasten ankle (Only applies to the high top version), foot, and calf
strap in this order. Tighten straps until snug and comfortable.
INFLATION/DEFLATION
6. Inflate air chambers by pressing “+” on the air bulb, and deflate by
pressing “-“. Inflate or deflate until snug. (Fig. 7)
– Caution: Do Not Over Inflate!
7. Before removing brace, deflate air chambers by pressing “-“.
WASHING INSTRUCTIONS
• Remove liner from walker before washing
• The liner should be washed by hand using a mild detergent and 30°C
(86°F) cold water. Do not use bleach or strong detergent. Do not
wash in washing machine or place in dryer.
• Line dry in shade.
• Walker plastic can be washed with a damp cloth and mild soap.
LIST OF MATERIALS:
Liner:
Polyester, Nylon, Polyurethane, PVC (no bpa), ABS
Shell: Polypropylene, EVA, TPO, Steel, Nylon, Cyanoacrylate
LIMITED WARRANTY
Össur warrants, to the original purchaser, that this product is free from
defects in materials and workmanship for six (6) months from initial
purchase. This warranty does not apply if this product (1) was not
purchased from Össur or its authorized dealer, (2) has been altered in
any way, or (3) has not been used in accordance with Össur’s
Instructions For Use (IFU). This Limited Warranty does not cover
damage due to accidents, neglect, misuse, or operation beyond capacity,
parts damaged by improper installation, substitution of parts not
approved by Össur, or any other alteration or repair by others that, in
Össur’s judgment, materially or adversely affects the product or part. For
complete warranty guidelines please visit www.ossur.com
SAVE THESE INSTRUCTIONS