1
2
3
2
1
3
4
38
OSSA TRi - User manual
39
OSSA TRi - User manual
Radiator
The radiator contains the engine refrigerant. To fill up with or add
refrigerant to the radiator, locate the tank lid. To locate this lid,
detach the air filter lid (see page 36 - Air Filter). Once the filter lid
is detached, the radiator lid is visible. Unscrew the lid and pour
in refrigerant.
ATTENTION: Use gloves. Do not open the
lid if the engine is hot. This could cause
burns. Avoid contact of the liquid with
the eyes, mouth or nasal passage. Do not
ingest. In the event of this happening,
follow the product instructions and consult
a doctor.
The radiator has an electric fan to force air through it, as can be
seen in the image below.
To fill the radiator, special coolant should be used
-30ºC.
To ensure that the motorcycle works correctly, periodic controls
must be carried out to check the coolant levels. This will ensure
that the motorcycle is running at an optimum temperature.
Always use special refrigerant for light alloy engines.
Air filter
Air filter. Cleaning and maintenance
The air filter should be controlled periodically. Lift the upper fuel
tank, as you can see in the image on page 29, in order to access
the filter box. Remove the filter rubber cap, unscrew the upper
part of the filter (not necessary to use tools) and take out. To
clean, use water and detergent, leave to dry and then lubricate
with a special liquid for filters. Reassemble using the steps outli-
ned previously but in reverse. Make sure that the parts areput in
their correct positions.
Carry out regular and thorough
maintenance of your motorcycle. Always
use original spare parts and top quality
products to ensure that it works correctly.
