background image

28

OSSA TRi - User manual

29

OSSA TRi - User manual

Upper section

Fuel tank

The engine of this motorcycle works with 
a  mixture  of  unleaded  petrol  and  2S  oil, 
100% synthetic in a 0.9 proportion.

The  fuel  tank  forms  a  structural  part  of  the  chassis 
and is located on the front inside part. To fill up with 
petrol, open the fuel tank lid, situated on the upper 
part, by unscrewing in an anti-clockwise direction.

It’s  recommended  that  a  hose  or  funnel 
is  used  to  fill  up  to  avoid  spilling  the 
petrol.  This  is  especially  important  if  the 
motorcycle  is  hot.  DO  NOT  fill  up  with 
petrol when the motorcycle is turned on.

1

2

Remove the upper section. Stage 1

2

1

3

4

Remove the upper section. S

To access different parts of the motorcycle or the motorcycle’s electrical system the upper section should be removed. This section is 
made up of 2 parts that are screwed onto the chassis and fitted together.

The first part of this section is located on the front above the fuel tank. Next is the second part of this section which corresponds to the 
seat area and rear mudguards.

Содержание TRi





































Отзывы: