Ossa EXPLORER 2014 Скачать руководство пользователя страница 65

Страница: 65 / 70

User manual 65

Warranty

EXCEPTIONS TO THE WARRANTY

The OSSA warranty does not cover the following items:

Damages that arise from not carrying out periodical revisions as stipulated by OSSA.

Damages due to repairs or revisions carried out using methods that have not been specified by OSSA.

Damages due to using the vehicle in races, rallies or other similar competition sports.

Damages due to the practice of functions that are not indicated in the Owner’s Manual using the motorcycle beyond those limits

or specifications indicated by OSSA (maximum load, passenger capacity, speed of motor and others)
e)

Damages due to the use of parts that are not original or not recommended by OSSA, or the use of fuel, lubricant and compound

liquids with specifications that are different to those indicated in the Owner’s Manual.

Damages due to modifications that are not approved by OSSA (motorcycle preparations, modifications for increased vehicle

performance, light reduction, increases and other changes).

Damages due to the vehicle’s aging (natural decolouration of painted or chrome surfaces, peeling and other types of deteriora-

tion).
h)

The replacement or repair labour with non-original OSSA parts, or that are assembled by staff not authorised as part of the

Official OSSA Post-Sales Service or as OSSA dealers.

Damages due to incorrect storage or transportation.

Damages due to uses that disregard traffic regulations and damages due to accidents.

Spare parts that need to be replaced frequently.

OSSA does not offer a guarantee for parts or fluids that have deteriorated due to use.
The parts or elements mentioned below are not covered by the warranty except when it is necessary to replace them during a repair
carried out under warranty.

Содержание EXPLORER 2014







































































Результаты поиска

Содержание EXPLORER 2014

Отзывы:

Похожие инструкции для EXPLORER 2014

Бренды по названию

Популярные бренды

Ossa EXPLORER 2014, Руководство пользователя

Результаты поиска

Содержание EXPLORER 2014

Отзывы:

Похожие инструкции для EXPLORER 2014

Бренды по названию

Популярные бренды