Module Installation
Ensure power to the receptacle has been disconnected before beginning
to remove/mount the receptacle.
1. Remove the shorting or open cap if supplied with the luminaire.
Note: Receptacle caps, if supplied with the luminaire, are used for closing or opening the socket circuit. In addition,
these caps can offer weatherproof protection for the receptacles that are not yet fitted with the WSLC Module.
WSLCs can be installed on luminaires that feature ANSI C136.41-compliant
receptacles.
3
2. Place the WSLC Module firmly into the receptacle (not supplied by OSRAM)
and twist it clockwise (Install arrow) until it locks in place.
Note
Tip
!
STOP
BLACK: Line In
RED: AC to Driver
GREY/-: Control to Driver
VIOLET/ +: Control to Driver
WHITE: Neutral
ORANGE: Sensor Power Supply
BROWN: Sensor Input
3. Mount the control with the arrow and ‘N’ on the cover facing north.
Note: The receptacle assembly may have to be rotated to face north.
Receptacle
Control Module Cap
OR
G
Se
ns
or
P
ow
er
B
R
N
S
en
so
r In
put
GR
Y(-
)/0
-1
0V
VI
O
(+
)/0
-1
0V
OR
G
Se
ns
or
P
ow
er
B
R
N
S
en
so
r In
put
GR
Y(-
)/0
-1
0V
VI
O
(+
)/0
-1
0V
